Digit Map - New Rock Technologies OM10 User Manual

4) Replacement
FXS CPN88 REPLACE 2682000
Note: When 8000 is dialed on FXS port, the call will be routed to port FXS-1.
5) Routing calls to IP network
FXS 0 ROUTE IP www.mysip.com:5060
Note: A call started with 0 will be routed to the SIP proxy with www.mysip.com:5060.
6) Routing calls to PSTN
IP X ROUTE FXO 1,2,3,4
Note: Calls from IP network will be routed to FXO port 1, 2, 3, and 4 in alternate way.
7) Support POS and Modem
FXS[2] 6120 CODEC PCMU/20/0
Note: Using PCMU for FXS-2 with 20ms of package size. /0 indicates that the echo
cancellation is off.
8) Routing calls to IP network, using given IP trunk
FXS 021 ROUTE IPT 1,2
9) Add prefix
FXS CPNX
Note: 021 Add 021 before the calling number when an extension is used to call it out.

2.7.6 Digit Map

After login, click "Advanced > Dialing" tab to open the dialing rules interface.
Figure 2-28 Configuration Interface for Digit Map
Digit map is used to effectively judge if the received number sequence is completed, for the purpose
of ending up receiving numbers and sending out the received numbers. The proper use of digit map
can help to reduce the connection time of telephone calls.
Shanghai New Rock Technologies Inc.
ADD 021
Page60/75