Replace An Sfp; Remove An Sfp; Figure 32: Connect Fiber-Optic Cable To A Pic; Figure 33: Small Form Factor Pluggable (Sfp) - Juniper M10 Hardware Manual

Figure 32: Connect Fiber-Optic Cable to a PIC

Replace an SFP

Small form factor pluggables (SFPs) are optical transceivers that can be removed from a PIC
(for more information, see "Physical Interface Cards (PICs)" on page 9).

Figure 33: Small Form Factor Pluggable (SFP)

SFPs are hot-insertable and hot-removable. Removing an SFP does not interrupt PIC
functioning, but the removed SFP no longer receives or transmits data. To replace an SFP,
perform the following procedures:

Remove an SFP

To remove an SFP, follow this procedure (see Figure 33):
1.
PIC cable
•
Remove an SFP on page 95
•
Install an SFP on page 96
Place an electrostatic bag or antistatic mat on a flat, stable surface to receive the SFP.
Have ready a rubber safety cap for the SFP transceiver and the cable.
Replace Packet Forwarding Engine Components
PIC
Connector
Locking pin
Replace Hardware Components
95