Replace Hardware Components; Tools And Parts Required; Table 16: Tools And Parts Required - Juniper M10 Hardware Manual

Chapter 10

Replace Hardware Components

Tools and Parts Required

Table 16: Tools and Parts Required

Most of the router's hardware components are field-replaceable units (FRUs), which
means that you can remove and replace them yourself. When you need to replace a
router component, contact your customer support or sales representative to order the
field-replaceable unit (FRU) that contains the component. For instructions, see "Return the
Router or Its Components" on page 163. For a list of the FRUs on the M5 and M10 routers,
see "Field-Replaceable Units (FRUs)" on page 3.
•
Tools and Parts Required on page 81
•
Replace the Fan Tray on page 82
•
Replace Packet Forwarding Engine Components on page 84
•
Replace Power System Components on page 98
•
Replace Routing Engine Components on page 112
To replace hardware components, you need the tools and parts listed in Table 16.
Tool or part
Electrostatic bag or antistatic mat
Electrostatic discharge (ESD)
grounding wrist strap
Flat-blade (–) screwdriver, 2.5 mm
Flat-blade (–) screwdriver, 3.0 mm
Components
FEB
PIC
Routing Engine
All
Serial cable to AUX/MODEM or CONSOLE Routing
Engine port
DC power cables
Replace Hardware Components
81