Upgrade The Firmware And Reboot The Intercom - CyberData 10935 Operation Manual

2.3 Upgrade the Firmware and Reboot the Intercom

Note
Note
To upload the firmware from your computer:
1. Retrieve the latest Intercom firmware file from the VoIP Intercom Downloads page at:
2. Unzip the firmware version file. This file may contain the following:
•
•
3. Log in to the Intercom home page as instructed in
4. Click the Update Firmware button to open the Upgrade Firmware page. See
Operations Guide
To guard against failed firmware upgrades, units shipped from CyberData with firmware
version 5.1.2 and later feature a built-in "fail safe" mechanism. Note that field upgrading
earlier units with v5.x.x will not allow for this feature.
Any units that have shipped with firmware version 6.0.0 or later will not be able to run
firmware that is version 5.1.2 or earlier.
Caution
When upgrading to firmware version 6.x.x from version 5.x.x or earlier, your
device configuration settings will be lost because the way that the device stores
the configuration settings is different in version 6.x.x.
GENERAL ALERT
http://www.cyberdata.net/products/voip/digitalanalog/intercom/downloads.html
Firmware file
Release notes
Home Page".
Section 2.2.2, "Log in to the Configuration
930242A-D
Installing the VoIP Intercom
Intercom Setup
Figure 2-32.
CyberData Corporation
65