Extron electronics DTP T EU 332 User Manual page 27

Symbol definitions
]
= Carriage return/line feed
}
= Carriage return (no line feed)
| = Pipe (can be used interchangeably with the
• = space
E
= Escape key
W
= Can be used interchangeably with the
X!
= Input number (for switching)
X@
= Switch mode
X#
= Input number (for audio configuration)
X$
= Status
X%
= Input HDCP status
X^
= Output HDCP status
X&
= Color bit depth mode
X*
= EDID
X(
= User EDID location
X1)
= Raw EDID data
X1!
= Resolution and rate in plain text
X1@
= Switch position
X1#
= Pixel phase
X1$
= Total pixels
X1%
= Horizontal and vertical start
X1^
= Switcher name
X1&
= Firmware version number to second decimal place (x.xx)
X1*
= Verbose mode
}
character)
E
character
= No input
0
0 = Manual
= Always output
0
0 = Off, disabled, not detected
= No source is detected
0
1 = Source is detected with HDCP
= Source detected without HDCP
2
0 = No sink is detected
= Sink is detected with HDCP
1
2 = Sink is detected without HDCP
= Auto
0
table
See the
or
66 67
128 or 256 bytes of hexadecimal data
Example:
1920x1200
= DTP
0
– ( = default)
00 63 32
Depends on input rate
– (
000 255 128
A text string of up to 24 alphanumeric characters and minus sign/hyphen (-).
No blank or space characters are permitted as part of a name.
The first letter must be a letter, and the last character must not be a minus sign/hyphen.
0 = clear/none
1 = verbose mode (default for RS-232 or USB) (default)
2 = tagged responses for queries
3 = verbose mode and tagged for queries
DTP T EU 332, DTP T EU 232, DTP T MK 332, and DTP T MK 232 • Remote Control
= HDMI input
1
1 = Auto switch VGA (default)
= HDMI input
1
1 = on, enable, or detected
= 8-bit
1
on page 23.
•
@60Hz
= HDBT
1
= default)
= VGA input
2
2 = Auto switch HDMI
= VGA input
2
21