Front Panel Connectors - Extron electronics DTP T EU 332 User Manual

2.

Front Panel Connectors

Figure 7.
A
B
NOTE: All transmitter models in this guide have a similar front panel appearance.
A
B
DTP T EU 332, DTP T EU 232, DTP T MK 332, and DTP T MK 232 • Installation and Operation
Using the four short screws, attach the transmitter to the flanged edges of the mounting
plate (see figure 6).
Wall Box
Mounting
Plate
Figure 6. Transmitter Installation (EU Unit Shown)
A C C B
PWR HDCP HDMI VGA AUTO
HDMI IN
AUDIO IN AUDIO IN
Front Panel Connectors (DTP T EU 322 Shown)
HDMI input port (see below)
Analog video input port (see below)
HDMI input port — Connect a digital video source into the switching
transmitter via this HDMI connector. It can accept HDMI, DVI (with an
appropriate adapter), or dual mode DisplayPort video sources.
NOTES:
•
The maximum HDMI cable length is 4.5 m (15 feet).
• Use an Extron LockIt lacing bracket to secure the HDMI connector to the
device (see HDMI Connection
Analog video input port — Connect an analog video source (RGB
and component) video source into the switching transmitter via this
15-pin HD connector. See VGA connector Wiring
connector pinout.
T O A IN
A U V G
A
V G
M I
H D
C P
H D
R
P W
IN
D IO
A U
IN
M I
H D
IN
D IO
A U
VGA IN
DTP T EU 332
C Audio In connectors (see
on page 12).
on page 13 to for
2
2 3
E U
P T
D T
page 11)
10