Rear Panel Connections - Datavideo HS-2000 Instruction Manual

Rear Panel Connections

HD- SDI IN
Inputs 1 to 3 are HD-SDI inputs only on BNC
connections.
HD- SDI IN / DVI-D IN
Input 4 has a choice of two connections HD-SDI
(via BNC) or DVI-D.
You select the connection you wish to use - for
more information, see INPUT 4 MODE (Page 17).
DVI-D IN
DVI-I Signal Input (Digital Input 5).
TALLY
Tally out socket. This supplies tally light information
to the Datavideo ITC-50 system (not supplied).
RS-232
9-pin serial port standard RS-232 interface.
Connect PC to update firmware, Logos or Mixer
Configuration.
HD- SDI OUT
4:2:2 SDI Video data supports SMPTE 292M
standard at 1.5G bps.
SDI transfers professional level video signals and
it's can connect to long distance transmission
systems.
HD- YUV OUT
HD- YUV component analogue output connectors.
DC INPUT
Connect the supplied AC adaptor to this DC Input
socket.
POWER
Switches the power On / Off.
MONITOR HDMI IN
The HS-2000 provides a useful connection for
confidence monitoring of HDMI sources on
location. However, this connection cannot be
mixed. Instead use a DAC-9 to convert the HDMI
source to HD-SDI and then the source can be
mixed via inputs 1~4.
14