Hs-2000 Monitor Pip Menu - Datavideo HS-2000 Instruction Manual

To adjust the Brightness press Enter again. An adjustment bar will appear at the bottom of the screen.
Use the Up / Down buttons to change the setting and then press Enter to store the new value and return to
the main menu.
To select a different setting (Contrast, Saturation, Sharpness) use the Up / Down buttons. Follow the same
procedure to set the other values.

HS-2000 Monitor PIP Menu

The HS-2000 Monitor PIP Menu allows you to adjust the appearance of the picture in picture on the HS-2000
monitor only.
Please see pages 9 and 16 of this manual if you wish to use a PIP effect within your HS-2000 mixed
PGM output.
The position, size, main source and sub source can be set in the monitor menus.
To access the monitor menu press menu and then the enter so that PIP Mode is highlighted
To access the options for the selected setting press enter again, so that the option column is highlighted - In
this case Large PIP.
40