Intercom & Monitor Control Panel; Itc-50 Intercom Controls - Datavideo HS-2000 Instruction Manual

Intercom & Monitor Control Panel
1 2

ITC-50 Intercom Controls

1. XLR Microphone Socket
2. MUTE Button
3. 1~5 & ALL Channel Buttons
4. Volume Control
5. Built-In Speaker
ITC-50 Intercom Controls
3 4
XLR Microphone Socket
Combined XLR / ¼" (6.3mm) Jack Microphone Input for either a Condenser or
Dynamic Gooseneck Microphone. XLR supports Condenser Microphones ¼"
(6.3mm) Jack supports Dynamic.
MUTE Button
Mutes all communication from the base station or any channel.
N.B. If any channel uses the CALL button the paging tone will still sound
even when the MUTE button is active.
Channel Buttons 1~5
Opens communication with individual channels. More than 1 channel can be
active at any given time, active channels are illuminated red.
All active channels will hear any communication from the operator or from any
other active channel.
The buttons will also indicate if any channel is paging, the paging channel will
flash in orange until the page is answered.
ALL Button
Opens communication with all channels. All channels will hear communication
from the operator, or from any other channel using the TALK button.
Volume Control
Controls the Volume of the built-in speaker or outputs to the headphones or
mic/headset according to what is connected
Built-In Speaker
Sounds audible alert when a channel is paging and provides audio during
talkback conversations. Speaker is mute when headphones or mic / headset are
connected to the ITC-50
5 6
Monitor Controls
6. Source Select
7. Aspect Ratio & PIP Button
8. Menu Navigation Buttons
9. Volume Control & Audio
Meter
37
7 8 9