Special Feature Menu - Datavideo HS-2000 Instruction Manual

Use the Up / Down buttons to navigate the available options.
You can choose:
You can also choose:
N.B. The PIP feature can only be one analogue source and one digital source. i.e. If the main source
is analogue (COMP.) then the sub source must be digital(SDI / HDMI), and vice versa.
Examples: Main Source
Sub Source

Special Feature Menu

The Special Feature Menu has settings for the safe area frame, the scan mode and the speaker settings.
The menu is accessed in the same way as the other menus, press the ENTER button and then use the UP /
DOWN buttons to highlight the setting you want to alter. In this case Frame Ratio
PIP Mode
PIP Position
PIP Main Source
PIP Sub Source
= COMP.
= SDI / HDMI
41
Large PIP
Small PIP
Bottom-Right
Top-Left
Top-Right
Bottom Left
COMP. - Component
HDMI
SDI
COMP. - Component
HDMI
SDI
Main Source = HDMI / SDI
Sub Source = COMP.