Bacnet Introduction; Bacnet Protocol Implementation Conformance Statement - Honeywell IAQPoint2 Technical Manual

IAQPoint2

BACnet introduction

When configured for BACnet, the IAQPoint2 contains ten BACnet objects� The reading from each
of the three sensors is conveyed by a analog input objects while the setpoints are conveyed by
an analog value objects� Additionally, two binary inputs provide a simple indication of relative air
quality and the occupied timer status� Finally, two binary outputs facilitate manipulation of the
relay and the occupied icon by BACnet� Each object has several properties which can be read and
sometimes written� All of the objects and properties of the IAQPoint2 BACnet device are listed in
the table at the end of this section� A BACnet protocol implementation conformance statement
(PICS) is included in this section, as well� More information about BACnet can be found at www�
bacnet�org�

BACnet Protocol Implementation Conformance Statement

ANNEX A
- PROTOCOL IMPLEMENTATION CONFORMANCE STATEMENT (NORMATIVE)
(This annex is part of this Standard and is required for its use�)
BACnet Protocol Implementation Conformance Statement
Date: May 22, 2012
Vendor Name: Honeywell International Inc
Product Name: Next Generation IAQ Point
Product Model Number:
Application Software Version: unknown
Firmware Revision: unknown BACnet Protocol Revision: 7
Product Description:
Next Generation IAQ point is an indoor air quality sensor� It can measure CO2, volatile organic
compounds, temperature and relative humidity� It communicates via BACnet MSTP and other
means�
BACnet Standardized Device Profile (Annex L):
p BACnet Operator Workstation (B-OWS)
p BACnet Advanced Operator Workstation (B-AWS)
p BACnet Operator Display (B-OD)
p BACnet Building Controller (B-BC)
p BACnet Advanced Application Controller (B-AAC)
p BACnet Application Specific Controller (B-ASC)
n
BACnet Smart Sensor (B-SS)
p BACnet Smart Actuator (B-SA)
53