Honeywell IAQPoint2 Technical Manual page 37

Indoor air quality monitor

Hide thumbs Also See for IAQPoint2:

Table of Contents

Configure menu > Configure Passwords & Reset > Set Password 1 or 2

Configure Password

Set Password 1

Set Password 2

Reset Configuration

Reboot

Password options are available through the Configure Passwords menu� The

Password Level 1, Password Level 2, and Reset to Factory Settings options are

described below� The Reboot option will force the monitor to shut down and then

restart�

This screen allows two passwords to be set� Passwords must be four digits long�

Configure menu > Configure Passwords & Reset > Reset all configuration

The Reset All Configuration option allows existing passwords to be deleted and

returns all of the monitor's options to the default values�

This function resets all user configuration information to factory defaults� This

includes setpoints, passwords, fieldbus configuration, and custom milliamp output

calibrations� The monitor will reboot after selections from this menu have been

made�

Configure menu > Configure Passwords & Reset > Reboot

This will force the monitor to reboot�

NOTE

There is no confirmation screen after pressing the [Reboot]

button�

IAQPoint2

Table of Contents