Honeywell IAQPoint2 Technical Manual page 60

IAQPoint2
BACnet Protocol Implementation Conformance Statement
Device Object
Optional Properties
Location
Description
Max Master
Max Info Frames
* The uniqueness of Object Identifier shall be ensured by the writing device� The PEM will not have
a mechanism to ensure the internetwork-wide uniqueness of these properties�
Max_APDU_Length_Accepted – PEM shall use a value of 480 for APDU length�
Max Info Frames shall have a value of 1�
Object Name – Range restriction of 1-22 characters�
Location – Range restriction of 1-22 characters
Description – Range restriction of 1-50 characters
Max Master – Range Restriction of 1-127
Object Identifier – Range Restriction of 0 to 4,194,302
Note: PEM shall increment the database revision property as per the BACnet specifications�
Objects List
Object
GAS_RDG_AI Analog Input 0
TEMP_AI Analog Input 1
RH_AI Analog Input 2
GAS_SPT_AV Analog Value 3
TEMP_SPT_AV Analog Value 4
RH_SPT_AV Analog Value 5
IAQGOOD_BI Binary Input 6
OVDTIMER_BI Binary Input 7
RLY_DRV_BO Binary Output 8
OCC_DRV_BO Binary Output 9
IAQ Device Device Object
58
Writable Properties (Not
must by the Standard)
Object Identifier*
Location
Description
Max Master
Type & Identifier
Gas Reading
Temperature reading in deg C or deg F
Relative Humidity Reading
Gas Setpoint value
Temperature Setpoint in deg C or deg F
Relative Humidity Setpoint
Gas concentration is low
Occupied Timer Running
Relay drive
Occupied state Drive
Device Object
Proprietary Property
None
Description