Table of Contents
Advertisement
CHAPTER
2
Introduction
Learn what you need to know about the Honeywell Vertex™ VC4 4-Point Continuous Monitor System before
operating.
System Overview
The Honeywell Vertex™ VC4 System continuously monitors up to 4 remote locations for toxic gases. It
responds to gases that exceed programmed levels by:
Triggering alarms and opening event windows to warn operators of high concentrations
⚫
Displaying the location, gas type and gas concentration
⚫
Storing the alarm information in a database
⚫
The Vertex™ VC4 System provides fast response to a wide range of gases. Each location may be up to 400 ft
(122 m) from the Vertex™ VC4 System. The system triggers relays for each individual point for two levels of gas
concentrations.
The Vertex™ VC4's flexibility allows it to be easily configured for tabletop use or rack mounting. The Vertex™
VC4 uses Honeywell patented Chemcassette® technology for rapid, accurate gas detection. The system was
designed for maximum uptime, so filters, detector tape, and even the entire chassis can be replaced quickly
and easily. And the system powers up in the same state as when powered down.
Operation can be through an LCD touch screen or through a local area network (LAN). Chemcassette® is a
registered trademark of Honeywell Analytics, Inc.
TM
Vertex
VC4 System
11
User Manual
Advertisement
Table of Contents
