Customized Earpieces: Clean Micromold, Litetip, Or Power Receiver Mold; Replace Prowax Filter - oticon Opn 1 miniRITE Instructions For Use Manual

Customized earpieces: Clean MicroMold, LiteTip,
or Power Receiver Mold
The earpiece should be cleaned
regularly.
The earpiece has a white wax
filter*. The filter keeps wax
and debris from damaging the
speaker.
Replace the filter when
clogged, or if the hearing
aid does not sound normal.
Alternatively, contact your
hearing care professional.
* VarioTherm MicroMold and LiteTip do not have a wax filter
26 About Startup Handling Options Tinnitus Warnings More info
Clean the vent by pressing
the brush through the hole,
twisting it slightly.
Vent
Wax filter

Replace ProWax filter

1. Tool 2. Remove
New
filter
New
filter
Remove the tool Push the empty pin
from the shell. The into the wax filter
tool has two pins, in the earpiece and
one empty for pull it out.
removal and one
with the new wax
filter.
3. Insert
Old filter
Insert the new wax
filter using the other
pin, remove the tool,
and throw it out.
27