Ups Rear Panel - Avaya S9RM Installation And Operator's Manual

Installation
NOTE A separate contact must simultaneously cause UPS input AC power to be
removed.
4. Reconnect the REPO connector to the REPO port.
5. Verify that the externally-connected REPO switch is not
6. Plug in the UPS and start the UPS by pressing the On button.
7. Activate the external REPO switch to test the REPO function.
8. De-activate the external REPO switch and restart the UPS.

UPS Rear Panel

Figure 16 shows the S9RM 3000 VA, 120V rear panel.
Network
Transient
Protector
Circuit Protector
28
Avaya S9RM 3000 VA, 120V UPS Site Preparation, Installation and Operator's Manual
Figure 15. REPO Connector
activated to enable power to the UPS output receptacles.
REPO Port Battery Connector
Fuse Holder
Two 5-15 Receptacles
Power Cord with L5-30P
Figure 16. S9RM 3000 VA, 120V Rear Panel
Pin 1 Pin 2
ConnectUPS-X Web/SNMP Card
Two 5-20 Receptacles
L5-30 Receptacle
:
700285596 Issue 1