Network Transient Protector - Avaya S9RM Installation And Operator's Manual

Additional UPS Features

Network Transient Protector

The Network Transient Protector, shown in Figure 22, is located on the
rear panel and has jacks labeled IN and OUT. This feature
accommodates a single RJ-45 (10BaseT) network connector or an RJ-11
telephone connector (for modems, fax machines, or other
telecommunications equipment). As with most modem equipment, it is
not advisable to use this jack in digital PBX (Private Branch Exchange)
environments.
1. Connect the input connector of the equipment you are
2. Connect the network or telephone cable (low voltage units
40
Avaya S9RM 3000 VA, 120V UPS Site Preparation, Installation and Operator's Manual
protecting to the jack labeled IN.
only) to the jack labeled OUT.
Figure 22. Network Transient Protector
In
Out
:
700285596 Issue 1