Normal Mode
During Normal mode, the
displays the percentage of UPS load capacity being used by the protected
equipment (see Figure 18). The UPS monitors and charges the batteries
as needed and provides power protection to your equipment.
The LEDs do not illuminate when the UPS load is less than
approximately 10%. Each LED represents 1/4 of a full load rating.
When all of the bar graph indicators are illuminated and the
indicator flashes, power requirements exceed UPS capacity; see page 57
for more information.
Avaya S9RM 3000 VA, 120V UPS Site Preparation, Installation and Operator's Manual
indicator illuminates and the front panel
<10%
10–25%
26–50%
51–75%
76–100%
>100%
Figure 18. Load Level Indicators
:
700285596 Issue 1
Operation
31