How To Replace Internal Batteries - Avaya S9RM Installation And Operator's Manual

UPS Maintenance

How to Replace Internal Batteries

Pull the battery out onto a flat, stable surface. The battery is unsupported when you
pull it out of the UPS.
Use the following procedure to replace internal batteries:
1. Using a flat-head screwdriver, open the right side of the front
NOTE DO NOT attempt to open the left side.
2. Push down and unsnap the LED panel.
3. Disconnect the battery cable from the UPS and cut the battery
46
Avaya S9RM 3000 VA, 120V UPS Site Preparation, Installation and Operator's Manual
C A U T I O N
panel and pull the front panel forward to access the battery.
cable wire tie.
Battery Cable
LED Panel
:
700285596 Issue 1