Initiating The Self-Test; Operating Modes - Avaya S9RM Installation And Operator's Manual

Operation

Initiating the Self-Test

NOTE The batteries must be fully charged and the UPS must not be in Battery mode
to perform the self-test.
Press and hold the
During the five-second test, the bar graph indicators cycle through
twice. If the UPS finds a problem, an LED indicates where the problem
is. For more information, see "Troubleshooting" on page 55.

Operating Modes

Avaya S9RM's front panel indicates the UPS status through the UPS
indicators. Figure 17 shows the UPS front panel indicators and controls.
Normal Mode Indicator
Battery Mode Indicator
Bypass Mode Indicator
Test/Alarm Reset Button
30
Avaya S9RM 3000 VA, 120V UPS Site Preparation, Installation and Operator's Manual
button for three seconds to initiate the self-test.
Off Button On Button
Figure 17. UPS Front Panel
Alarm Indicators (see page 55)
Bar Graph Indicators
Indicator Legend
Unlit
Lit
Flashing
:
700285596 Issue 1