Call Forwarding - TIPTEL .com 410 Installation Manual

Configuration menu: Subscriber
Follow me
This function allows you to transfer the call forwarding of your internal number to the
phone number of your current location.
Press the following buttons to apply call forwarding to the other extension:
(individual phone number)
Password
After calling up the configuration menu for a subscriber, you have to enter a user
name (subscriber name) and a password. Enter the desired password here. Every
subscriber is able to replace the password assigned to him by the administrator with
his/her own password. In this case the password in the sub-menu "Administrator" as-
signed by the administrator no longer identical with the one entered here. As admin-
istrator you cannot see the password entered by the subscriber but you can overwrite
it any time.
Outgoing telephone number
When placing a call to an external subscriber the telephone system will advise the
exchange via which MSN the call shall be established. The exchange will assign the
charges to this MSN. In case CLIP is activated that MSN can also be displayed on the
called party's telephone. Is that number, however, not known to the exchange, usu-
ally the base number will be used. Some exchanges - if ordered - will also transfer
unknown numbers transparently through to the called party. In order to be able to
use this service " CLIP – no screening", you will have to order this service from your
provider which is usually with costs. This service might be of interest for outgoing
transfer e.g. of service numbers (e.g.0180) or numbers of another subsidiary. But
please make sure not to violate the contract of with your provider concerning this
service.
You now have the option to enter that number. If you do not wish to change the pre-
settings carried out by the administrator, just leave that field empty - which should be
the normal case.

Call forwarding

Call forwarding is executed within the telephone system and can be configured indi-
vidually for every subscriber. It is possible to forward calls to internal and external cal-
ling destinations. A maximum of two calls can be programmed for forwarding in suc-
cession within the telephone system. An external phone number must always contain
the for exchange connection.
65