TIPTEL .com 410 Installation Manual page 68

•
LED on =>
Action: none
•
LED off =>
Action: pressing the key activates the hands-free mode and provides a CO
line (external dialling tone after standard exchange connection). The hands-
free mode is not automatically activated when the handset is lifted.
•
LED flashing => outside line authorisation is withdrawn
Action: none
Note: Do not assign this function to any key if the CO-line access for this sub-
scriber has been blocked (menu item "exchange authorisation for out-
going calls": none). Otherwise, this key will be flashing permanently.
For example, the exchange authorisation can be withdrawn because
the subscriber concerned has exceeded the limit of his charge account.
CO-line access with specific MSN/DDI (line key)
Here you specify which MSN/DDI of your telephone system should be used for an
outgoing external call. As the MSNs/DDIs are assigned to certain external S0 connec-
tions, you determine at the same time which port should be used for the telephone
call. The status is indicated by the LED as follows:
•
LED on =>
Action: none
•
LED off =>
Action: Pressing this key activates the hands-free mode and provides an ex-
ternal line (dialling tone after destination exchange connection). The hands-
free mode is not automatically activated when the handset is lifted.
Note: This setting permits access for this subscriber to an otherwise blocked
outside line (menu option "outside line permission for outgoing calls": No-
ne) to an outside line via a special MSN/DDI!
•
LED flashing => an incoming call for this MSN/DDI
•
Action: Pressing the key activates the hands-free mode, and the incoming
call is picked up. The hands-free mode is not automatically activated when
the handset is lifted.
Internal destination
The subscriber's phone number (internal destination number) has to be entered here.
The status is indicated by the LED as follows:
•
LED on =>
Action: Pressing the key activates the hands-free mode and the other sub-
scriber's call is picked up (condition: a call pick-up is allowed according to
the other subscriber's settings, pick-up parameter: answering machine). The
hands-free mode is not automatically activated when the handset is lifted.
Configuration menu: Subscriber
no CO line available
an external line is available
this MSN/DDI is being used for the telephone call
Standby mode
the subscriber is holding a telephone call
68