entry. tiptel 85 system support a menu guided operation and also supports a list with
project codes / cost centres.
Example for a three digit cost centre with the target phone number
Note:
This function can be used very comfortably with computer-integrated
telephony. Use of project codes / cost centres is supported by a huge
number of CTI applications.
Call analysis software
Remote access to call data
The telephone system provides a special file to enable you to regularly query the call
data. This file is protected by its own password that you can configure here. The que-
ry is usually made at "[hostname]/charges/charges.txt". Hostname is e.g.
"192.168.34.100" (factory default). The call analysis software MicroBX supports this
format and can read these data automatically.
Charge printer / server
Your telephone system also has the option of sending charge data directly. You can
send these data to the network (charge server).
Charge server
This setting supports the TeKoWIN charge analysis software. Enter the IP address for
the PC that runs the TeKoWIN software. The TeKoWIN application on the PC is ad-
dressed via the stated port.
Menu: Day/night switching
Note:
This menu is only available when it has been enabled in the "Settings"
menu.
Your telephone system has a convenient day/night switching function. After activation
you can open the configuration from the configuration icon. You can change the fol-
lowing settings using the day/night switching:
•
Call distribution
•
Call forwarding external
•
Authorisation to access an outside line
Configuration menu: Settings
46
: