Standard Horizon CP190i Owner's Manual page 93

Standard horizon gps chart plotters owner's manual
Hide thumbs Also See for CP190i:
Table of Contents

Advertisement

Lat/Lon Grid
: Turns the Latitude and Longitude grid lines on or off on the chart page. See the following figure:
Lat/Lon Grid ON
Chart Boundaries : Turns the Chart Boundaries On, Off or Auto. The Chart Boundaries are the "ticked" boxes
sourround the coastline. Each box indicates an area where more detail is available. The Chart
Boundaries are only show when a C-MAP B
Chart Plotter. See the pictures below:
Chart Boundaries ON
Value Added Data : Turns the Value Added Data On or Off. The Value Added Data (VAD) is a collection of additional
cartographic objects which are not present on the original paper chart (from which the electronic
chart derives). These objects have been obtained from other sources and then merged to the
electronic charts in order to provide more information useful for the navigation. VAD object can
be any cartographic objects and it can be distinguished from the official-chart-objects from the
Quick Info. A dedicated icon is shown on the Quick Info window to indicate that the object queried
is a VAD. The same icon is also shown on the Full Info page and in addition the extended text Value
Added Data is shown on the details of the VAD object. See the figure below:
1
Example of VAD object
Chart Lock (*)
: Turns the chart function On/Off. When Chart Lock is On, the available zoom scales are only the
ones containing cartographic data. Instead when Chart Lock is Off, it is possible to zoom down
into zoom scales not covered by cartographic data after the last available zoom scale covered by
cartographic data. The DSI (Data Safety Indicator) window, if present, will show "NO CHART",
when an empty level is entered in the location of chart expansion mode.
Mixing Levels
: When the chart coverage at the current chart scale does not fill the entire display, the GPS Chart
Plotter draws the rest of the chart using charts from above and below the current scale. When this
function is turned on you will notice the display may redraw 2 to 3 times to show all the details.
Page 94
J
Y
EPPESEN
1
Lat/Lon Grid OFF
NT
+
or MAX CARD is inserted into the GPS
Chart Boundaries OFF
CP190i and CPF190i

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cpf190i

Table of Contents