Table of Contents
Advertisement
1
O.ZOOM
Normal:
when the chart is displayed at normal
1
scale.
U. Zoom:
red when the chart is under-zoomed out
more than twice normal scale, gray otherwise.
O. Zoom:
red when the chart is over-zoomed in
more than twice normal scale, gray otherwise.
No Chart:
red when the chart is zoomed in more
than twice normal scale, gray otherwise.
2
Red when a more detailed chart is available under
the cursor position.
Red when at least one of the following objects or
3
layers is turned off (by the user) Depths/soundings;
Wrecks/obstructions; Tracks/routes; Attention Areas; Nav-Aids.
4
Displays red when clearing overlapping objects.
Red when "Guardian Technology" detects one of the following objects: Land, Intertidal, Depth
5
Area, Rocks, Obstructions, Shoreline Constructions, Fishing Facility, Wrecks, Dragged area,
Diffusion area, Mooring facilities, Pingos and Production installations.
6
Red when "Guardian Technology" detects cautionary or restricted area.
6.0.6
Satellite Imagery
This function allows to overlay the Satellite image for background chart. When it is set On,
the Palette is set to Normal to display the proper colors.
The satellite image is only shown on 100NM, 50NM and 20NM scales.
To activate this function follow the procedure below:
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight SATELLITE IMAGERY and press [ENT] or
move the ShuttlePoint knob to the right.
4. The menu now shows two selections, ON or OFF.
5. Move the ShuttlePoint knob to select the selection and press [ENT].
6. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint
knob to the left until the Chart Page is shown.
CP190i and CPF190i
2
3
BEST MAP
DATA OFF
Figure 6.0.5 - Safety Status Bar
4
DECLUT.
Safety Status Bar
NOTE
5
6
DANGERS
CAUTIONS
WAAS 3D
Page 59
Advertisement
Table of Contents
