Table of Contents
Advertisement
4. A window is shown on the low-left side of the chart. Press [ENT] to set the date and time
manually, and [GOTO]/[MENU] to increase/decrease time; press [CLR] to exit.
6.0.8
Chart Language
The CP190i and CPF190i may be customized to show the local language of the chart.
To select the Chart Language you want:
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight CHART LANGUAGE and press [ENT] or move
the ShuttlePoint knob to the right. A new popup window will appear on the screen. The
available functions are described in the table below.
Language
: Allows setting the language to display chart information. The language is chosen among the list
of languages available on the cartographic data (data cartridge or embedded charts).
Mode
: Defines how objects are translated. Selections are:
4. After the selection is made, press [CLR] repeatedly or move the ShuttlePoint knob to
the left repeatedly until the Chart Page is shown.
a. When the Chart Language is changed, the following settings are automatically selected: MODE
is set to Off and Chart Language is set to your selection.
b. If the C-CARD is removed or changed, the Chart Language should be confirmed and changed
if necessary.
6.0.9
Pictures or Diagrams
Using optional C-MAP B
on the CP190i and CPF190i display. These Pictures are typically used to facilitate the
identification of cartographic objects or places around the chart: they can be the landscape
layout nearby a harbor, the shape of a bridge or of a buoy etc. On some objects, such as
bridges, the image associated can represent the Diagram representing the shape of the
objects and the various characteristics (length, height, type of bridge etc.).
CP190i and CPF190i
Off
: Enables the language chosen in the Language menu above. If the selected
language is not present on the objects information, English is used.
English : Always uses English.
Local : Uses the Local language present on C-MAP B
language is available, English is used.
J
MAX data cards allows you to show pictures or diagrams
Y
EPPESEN
Figure 6.0.9 - Pictures and Diagrams
NOTE
J
C-CARD. If no Local
Y
EPPESEN
Page 61
Advertisement
Table of Contents
