Table of Contents
Advertisement
· HDOP
= Horizontal Dilution of Precision
· VDOP
= Vertical Dilution of Precision
· Temp
= Water Temperature
· TLOG
= Trip Log
· DATE
= Current Date
· TIME
= Current Time
· VMG
= Velocity Made Good
· ETA
= Estimated Time of Arrival
· TRACKING = Tracking
· SCALE
= Chart Scale
· GPS Status = Shows GPS Fix Status (WAAS, 3D, 2D, ...)
When the GENERAL window is selected and the GPS chart plotter is in Home Mode, the BRG will
show - - -, unless the GPS chart plotter is navigating to a point. When in Cursor Mode, the BRG
shows the Bearing from the ship's position to the cursor location.
To select the desired field, follow the procedure:
1. Press and hold [MENU] until a field is highlighted (it will be shown in a yellow frame).
2. Move the ShuttlePoint knob to the desired data field (the yellow frame is moved to the
desired data field) and press [ENT]. The popup window will be shown.
3. Move the ShuttlePoint knob up/down or left/right to choose the desired setting and press
[ENT].
4. Press [CLR] to store and exit the editing mode.
Data window field on the NAVIGATION, HIGHWAY, GPS STATUS and NMEA pages may be
customized in the above manner.
See Par. 10.1.0 if Trip Log is selected in one of the data windows and you want to reset the log.
12.0.4 Additional Functions on Chart Page
When on the Chart page you will notice icons of Buoys, Towers, Lights, Wrecks, Tide
Stations and Port Icons. If the cursor is moved over the top of these icons a popup window
will be shown with information about the icon.
Page 90
NOTE
NOTE
WAAS 3D
Figure 12.0.3 - Customizing the Data Windows
NOTE
1
AAS 3D
WAAS 3D
CP190i and CPF190i
Advertisement
Table of Contents
