Table of Contents
Advertisement
knob move the cursor over the PTX to navigate to and then press [ENT], select GOTO using
the ShuttlePoint knob and press [ENT].
If the navigation is set to the selected PTX icon, to terminate the navigation press [ENT],
select STOP GOTO using the ShuttlePoint knob and press [ENT].
16.4.2 The MOBILARM Alarm Status List
The MOBILARM Alarm Status List shows the list of all PTX that the GPS Chart Plotter has
received an alarm from. To review the page:
1. Select the Chart Page.
2. Press [MENU] to show the Main menu.
3. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT].
4. Move the ShuttlePoint knob to highlight MOBILARM and press [ENT].
1
PTX number
2
Time the PTX alarm was received
3
PTX position
4
PTX status
CP190i and CPF190i
Figure 16.4.1 - Example of Goto PTX
Figure 16.4.1a - Example of Stop Goto PTX
1
2
3
4
Figure 16.4.2 - Example of MOBilarm PTX List page
213°22.120W
20°01.022N
03:45:14 PM
10:31:24 PM
305°04.015W
79°56.320N
Recovered
Recovered
Recovered
Page 121
Advertisement
Table of Contents
