Table of Contents
Advertisement
5. Another window will be shown detailing the selected Tide Station information.
6. Press [CLR] to show the actual position of the Tide Station on the Chart Page.
7. Press [CLR] again at any time to return your cursor to your vessel's position.
Refer to the image above. The time (3) displayed corresponds to the location of the cross-
hair cursor (2) in the Tide Graph (1). Moving the ShuttlePoint knob to the left or right changes
the time, and moving the ShuttlePoint knob up or down selects the Tide height and Tide
draught on the Tide Graph.
The Local Offset matchs the Time Offset entered in the Time Setup menu (see Par. 3.2)
4.0.3
Wrecks
This feature is used to locate the 10 nearest Wrecks to the position of your vessel. A Wreck
is represented with an icon on the chart. See the following table:
ICON
#
CP190i and CPF190i
WAAS 3D
Figure 4.0.2 - Find Tide Stations
1
Figure 4.0.2a - Tide Graph page
non-dangerous wreck
dangerous wreck
distributed remains of wreck
F o u l
wreck showing mast/masts
Masts
wreck showing any portion of hull or superstructure
Figure 4.0.3 - Wreck icons Table
NOTE
DESCRIPTION
2
3
Page 43
Advertisement
Table of Contents
