Hardware Hookup - Crestron HD-XSP Operations & Installation Manual

7.1 High-Definition Professional Surround Processor
Connect the Device
Hardware Connections for the HD-XSP (Front)
COMPUTER:
To Computer Console
Hardware Connections for the HD-XSP (Rear)
HDMI OUT:
To HDMI Device
HDMI
IN OUT
HDMI IN:
From HDMI Source From Unbalanced Analog
Audio Connections
SIGNAL
NAME
+
-
G
+
-
18 • 7.1 High-Definition Surround Processor: HD-XSP

Hardware Hookup

Make the necessary connections as called out in the illustration that follows this
paragraph. Apply power after all connections have been made.
When making connections to the HD-XSP, use Crestron power supplies for Crestron
equipment.
DIGITAL:
From Digital Audio Sources
3
L
MIX
L R
2 4
+ - G + -
R
5 6
DIGITAL BALANCED
INPUT
INPUT:
From Balanced or Unbalanced
Audio Sources
NOTE: Ensure the unit is properly grounded by connecting the chassis ground lug
to an earth ground (building steel).
NOTE: To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the table of specifications.
One balanced/unbalanced audio input and four balanced/unbalanced audio outputs
are provided, utilizing 5-pin and 6-pin terminal block connectors respectively. For
connection details, refer to the following table and diagrams.
BALANCED
AUDIO INPUT AUDIO OUTPUT
L +
L -
Shield/Ground
R +
R -
OUTPUT:
To Amplifiers
OUTPUT
FRONT SURROUND BACK CENTER - SUB
L R L R L R C S
+ - G + - G + - G + - G + - G + - G + - G + -
INPUT:
Analog Audio Source
BALANCED UNBALANCED
AUDIO INPUT
L +
L - L – signal return,
jumper to GND
Shield/Ground Ground
R +
R - R – signal
jumper to GND
Operations & Installation Guide – DOC. 7446A
Crestron HD-XSP
24V DC, 2.0A:
From AC Power Pack
SERIAL LABEL
MAC ID LABE L
— ---
DOWNMIX 24V
2.0A
L R
G + - G + - G
LAN
LAN:
10BASE-T/100BASE-TX
Ethernet to Lan
UNBALANCED
AUDIO OUTPUT
L + In Left/Subwoofer +
Out
Open
Common ground
R + In Right/Subwoofer +
Out
Open
return,
G