Table of Contents
Advertisement
Crestron TPMC-CH-IMC
Hardware Hookup
The TPMC-CH-IMC serves as an interface between the touchpanel and
the Cresnet system. Refer to the illustration after this paragraph for
proper connections; apply power last. When making network connections
to a control system or Cresnet peripherals, refer to "Network Wiring" on
page 8. It is not necessary to make connections to a video source unless a
video window object resides on a page within the uploaded Crestron
VisionTools
Hardware Hookup for the TPMC-CH-IMC
AUDIO (TO PANEL):
BALANCED AUDIO OUT AND MIC IN
OVER CAT5 (BLUE)
VIDEO (TO PANEL):
BALANCED VIDEO OUT OVER CAT5
(RED)
CRESNET (TO PANEL):
SENDS AND RECEIVES CRESNET
SIGNALS BETWEEN TOUCHPANEL
AND CONTROL SYSTEM
A triamese cable that is included with the touchpanel has an RJ-45
connector with a blue cover to match the blue label on the
TPMC-CH-IMC and an RJ-45 connector with a red cover to match the
red label on the TPMC-CH-IMC. The cable also has a 4-position mini-
terminal block connector for making a network connection between the
touchpanel and the TPMC-CH-IMC.
The TPMC-CH-IMC can send and receive balanced or unbalanced audio
signals. Refer to the following diagrams when connecting balanced and
unbalanced signals to the TPMC-CH-IMC.
Operations Guide - DOC. 6345
®
Pro-e (VT Pro-e) project.
Interface Module
PROVIDES LINE-LEVEL BALANCED
LINE-LEVEL, BALANCED &
UNBALANCED AUDIO SOURCES
UNBALANCED "P
UNBALANCED "C" FOR S-VIDEO,
OR UNBALANCED "P
UNBALANCED COMPOSITE VIDEO,
UNBALANCED "Y" FOR S-VIDEO,
OR UNBALANCED "Y" FOR YP
TO CONTROL SYSTEM AND
OTHER CRESNET DEVICES
Interface Module: TPMC-CH-IMC • 11
AUDIO OUT:
MICROPHONE AUDIO
AUDIO IN:
P
:
R
" FOR YP
P
R
B
R
C/P
:
B
" FOR YP
P
B
B
R
COMP/Y/Y:
P
B
R
CRESNET:
Advertisement
Table of Contents
