Crestron C2N-DAP8RC Quick Start

Digital audio processor with room control

Hide thumbs Also See for C2N-DAP8RC:

Download this manual See also: Operating Manual

C2N-DAP8RC

Quick

Digital Audio Processor

Start

With Room Control

These instructions can be performed in the office or at the job site to get your Crestron

C2N-DAP8RC

Digital Audio Processor (DAP8RC) ready for operation quickly. They cover basic procedures necessary to

verify that the unit functions properly, and include running the example program, which is downloadable

from the Crestron FTP website.

Hardware Hookup

Before starting the hardware hookup procedures, make certain power to all devices is off.

NOTE: The DAP8RC is designed to be used only with a Crestron 2-Series control system.

NOTE: The DAP8RC requires 21 Watts of Cresnet power and may require a dedicated Crestron power

supply.

Connect Head End and Local Sources

Connect audio and video sources to the DAP8RC using the diagram below as a guide.

Digital Audio Processor with Room Control: C2N-DAP8RC • 1

Quick Start – DOC. 6232

Page 1: Hardware Hookup
Start With Room Control ® These instructions can be performed in the office or at the job site to get your Crestron C2N-DAP8RC Digital Audio Processor (DAP8RC) ready for operation quickly. They cover basic procedures necessary to verify that the unit functions properly, and include running the example program, which is downloadable from the Crestron FTP website.
Page 2: Communication Setup
DAP8RC to the control system. If communication cannot be established, refer to the “Troubleshooting Communications” section in the Operations Guide for the control system. 2 • Digital Audio Processor with Room Control: C2N-DAP8RC Crestron C2N-DAP8RC Quick Start – DOC. 6232...
Page 3 NOTE: The supplied program is designed to work with a Crestron TPS-4500 touchpanel and a PRO2 control system. If your system uses a different touchpanel and/or control system, convert the programs accordingly.
Page 4 Calibration procedures are beyond the scope of this Quick Start. Instead, refer to “Surround Sound System Setup” on page 25 of the Operations Guide for the DAP8RC (Doc. 8187) for detailed instructions. Crestron Electronics, Inc. 15 Volvo Drive, Rockleigh, NJ 07647 Tel: 888.CRESTRON...