Table of Contents
Advertisement
Crestron HD-XSP
Configuration
Open "Installer" Menu
Operations & Installation Guide – DOC. 7446A
7.1 High-Definition Professional Surround Processor
The HD-XSP can be configured with the front panel controls or with Crestron
Toolbox. For details on using Crestron Toolbox, please refer to the Crestron Toolbox
help file. Otherwise, continue reading below.
"Installer" Menu
The "Installer" menu is used to configure the HD-XSP
To configure the HD-XSP using the front panel controls, the "Installer" menu must
be displayed. To open the "Installer" menu:
1.
Press HOME to display the "Crestron HD-XSP" screen as shown in the
following illustration.
"Crestron HD-XSP" Screen
Crestron
HD-XSP
Press BACK to display the "Password" screen.
2.
"Password" Screen
Password
[0]000
3.
Use the ∧, ∨, <, >, and SELECT buttons to enter the password.
•
To select a number, press ∧ or ∨.
•
To move the cursor left or right, press < or >.
When the password is displayed, move the cursor to the rightmost digit and
press SELECT. The "Installer" menu is displayed.
NOTE: The default password is 0000. For instructions on changing the
password, refer to "Password" on page 34.
7.1 High-Definition Surround Processor: HD-XSP • 23
Advertisement
Table of Contents
