Table of Contents
Advertisement
7.1 High-Definition Professional Surround Processor
Loudness
Equalizer
Direct Mode
40 • 7.1 High-Definition Surround Processor: HD-XSP
"DRC" Menu
b.
Press ∧ or ∨ to highlight the desired level of DRC to be applied
and press SELECT. The display returns to the previous screen.
4.
Press BACK to return to the previous screen.
The loudness feature can be set from the "Theater" menu. To set loudness:
1.
Open the "Theater" menu as described in "Theater" on page 38.
2.
Press ∧ or ∨ to highlight Loudness: On or Loudness: Off and press
SELECT. The setting toggles between "On" and "Off".
The HD-XSP can use a custom equalization setting that is created in Crestron
Toolbox. To set the equalization:
1.
Open the "Theater" menu as described in "Theater" on page 38.
Press ∧ or ∨ to highlight EQ and press SELECT. The "Equalizer" screen is
2.
displayed.
"Equalizer" Screen
Equalizer
Flat
Custom
3.
Press ∧ or ∨ to highlight the desired setting and press SELECT. The
display returns to the previous screen.
NOTE: The Custom setting can only be configured with Crestron Toolbox.
Direct mode is used to bypass any signal processing. To set Direct mode:
1.
Open the "Theater" menu as described in "Theater" on page 38.
Press ∧ or ∨ to highlight Direct Mode: On or Direct Mode: Off and press
2.
SELECT. The setting toggles between "On" and "Off".
Downmix
The Downmix section of the "HD-XSP" menu provides controls for managing the
audio settings for the downmix output. To open the "Downmix" menu, press ∧ or ∨
to highlight Downmix and press SELECT. The "Downmix" menu is displayed.
DRC Level
Light
Medium
Heavy
Operations & Installation Guide – DOC. 7446A
Crestron HD-XSP
Advertisement
Table of Contents
