Table of Contents
Advertisement
Interface for Apple
Ventilation
Mounting
Connect the Device
10 • Interface for Apple
®
®
®
iPod
with Video
Installation
The CEN-IDOCV should be used in a well-ventilated area.
To prevent overheating, do not operate this product in an area that exceeds the
environmental temperature range listed in the table of specifications. Consider using
forced air ventilation to reduce overheating. Consideration must be given if installed
in a closed or multi-unit rack assembly since the operating ambient temperature of
the environment may be greater than the room ambient temperature. Contact with
thermal insulating materials should be avoided on all sides of the unit.
The CEN-IDOCV can be mounted in a rack or to any surface using the integral
mounting flanges. Mounting hardware is not provided.
Hardware Hookup
Make the necessary connections as called out in the illustration that follows this
paragraph. Refer to "Network Wiring" on page 9 before attaching the LAN cable.
Apply power after all connections have been made.
When making connections to the CEN-IDOCV, note the following:
•
Use Crestron power supplies for Crestron equipment.
•
The CEN-IDOCV-DS is the only docking station that can be used with the
CEN-IDOCV.
•
The 6.5 foot (2 meter) cable (included with the CEN-IDOCV-DS) cannot be
extended.
®
iPod
with Video: CEN-IDOCV
Crestron CEN-IDOCV
Operations Guide – DOC. 6761B
Advertisement
Table of Contents
