Hardware Hookup - Crestron CAPTURE-HD Operation Manual

High-Definition Capture Recorder
Stacking
Hardware Connections for the Capture Recorder, Front View (CAPTURE-HD-PRO Shown)
14  High-Definition Capture Recorder: CAPTURE-HD/CAPTURE-HD-PRO
Crestron
4. Repeat procedure (steps 1 through 3) to attach the remaining ear to the
opposite side.
Four "feet" are provided with the Capture recorder so that if the unit is not rack
mounted, the rubber feet can provide stability when the unit is placed on a flat
surface or stacked. These feet should be attached prior to the hookup procedure.
Refer to the following illustration for placement of the feet.
Foot Placement for the Capture Recorder
NOTE: No more than two Capture recorder units should be stacked.

Hardware Hookup

Make the necessary connections as called out in the illustrations that follow this
paragraph. Apply power after all connections have been made.
CAPTURE-HD/CAPTURE-HD-PRO
Operations Guide – DOC. 7233C