Crestron PSPHD Operation Manual
  1. Manuals
  2. Brands
  3. Crestron Manuals
  4. Recording Equipment
  5. PSPHD
  6. Operation manual

Crestron PSPHD Operation Manual

Procise high definition professional surround sound processor
Hide thumbs Also See for PSPHD:
Table of Contents

Advertisement

Quick Links

Download this manual
Crestron PSPHD
PROCISE™ High Definition Professional
Surround Sound Processor
Operations Guide

Advertisement

Table of Contents
loading

Related Manuals for Crestron PSPHD

Summary of Contents for Crestron PSPHD

  • Page 1 Crestron PSPHD PROCISE™ High Definition Professional Surround Sound Processor Operations Guide...

  • Page 2: Important Safety Instructions

    IMPORTANT: • Disconnect power prior to connecting or disconnecting equipment. The PSPHD can be used with Class 2 output wiring. • Do not install in direct sunlight. • The apparatus must be installed in a way that the power cord can be removed either from the wall outlet or from the device itself in order to disconnect the mains power.

  • Page 3: Regulatory Compliance

    Regulatory Compliance As of the date of manufacture, the PSPHD has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 5: Table Of Contents

    Uploading and Upgrading......................50 Establishing Communication..................50 Programs and Firmware .................... 51 Program Checks ......................52 Operation ..........................53 Turn on the PSPHD ....................53 Standby........................53 Home ......................... 53 Display Brightness ....................53 Volume Control......................53 Mute .......................... 53 Select a Source ......................
  • Page 6 Further Inquiries ......................62 Future Updates ......................63 Appendix: Audyssey Laboratories, Inc..................64 Return and Warranty Policies ....................65 Merchandise Returns / Repair Service ..............65 CRESTRON Limited Warranty................. 65 Trademark Information ..................... 66 ii • Contents Operations Guide – DOC. 6837B...

  • Page 7: Procise™ High Definition Professional Surround Sound Processor: Psphd

    PROCISE™ High Definition Professional Surround Sound Processor: PSPHD Introduction The PROCISE™ High Definition Professional Surround Sound Processor (PSPHD) ® from Crestron is a professional 7.3 surround sound audio processor designed for high-end home theaters and corporate boardrooms. Advanced features include ®...
  • Page 8 Features like Audyssey* MultEQ XT, Dynamic EQ , and Dynamic Volume™ enable the PSPHD to calibrate a complete 7.3 speaker system to perfection. Its three independent subwoofer outputs include extensive bass management to achieve realistic low frequency effects at every seat. With XLR balanced outputs and inputs, and numerous digital inputs including HDMI and professional AES/EBU, PROCISE is capable of ultra low-noise performance up to 125 dB SNR.

  • Page 9: Applications

    XLR balanced inputs, Cresnet and Ethernet connectivity, and seamless control and monitoring through the PSPHD front panel. Applications The following diagram show 3-D and 2-D views of a PSPHD in residential and commercial applications. PSPHD in a Residential Home Theater Application PROCISE™...
  • Page 10 PROCISE™ Surround Sound Processor Crestron PSPHD PSPHD in a Residential Home Theater Application, 2-D View 4 • PROCISE™ Surround Sound Processor: PSPHD Operations Guide – DOC. 6837B...
  • Page 11 Crestron PSPHD PROCISE™ Surround Sound Processor PSPHD in a Conferencing Boardroom with Audio and Video Conferencing PROCISE™ Surround Sound Processor: PSPHD • 5 Operations Guide – DOC. 6837B...
  • Page 12 PROCISE™ Surround Sound Processor Crestron PSPHD PSPHD in a Conferencing Boardroom with Audio and Video Conferencing, 2-D View 6 • PROCISE™ Surround Sound Processor: PSPHD Operations Guide – DOC. 6837B...
  • Page 13 Crestron PSPHD PROCISE™ Surround Sound Processor PSPHD in a Boardroom without Conferencing PROCISE™ Surround Sound Processor: PSPHD • 7 Operations Guide – DOC. 6837B...
  • Page 14 PROCISE™ Surround Sound Processor Crestron PSPHD PSPHD in a Boardroom without Conferencing, 2-D View HD Cable Box PSPHD Processor HDMI Out Digital HDMI In 1 HDMI Out Blu-Ray Disc Player LCD Display HDMI In 2 HDMI In 3 HDMI Out...
  • Page 15 Crestron PSPHD PROCISE™ Surround Sound Processor PSPHD in an Auditorium PROCISE™ Surround Sound Processor: PSPHD • 9 Operations Guide – DOC. 6837B...
  • Page 16 Audio Output 6 Mic 6 Audio Input 6 Ethernet Mic 7 Audio Input 7 Audio Output 7 Audio Output 8 Mic 8 Audio Input 8 To Control System 10 • PROCISE™ Surround Sound Processor: PSPHD Operations Guide – DOC. 6837B...

  • Page 17: Internal Block Diagram

    Crestron PSPHD PROCISE™ Surround Sound Processor Internal Block Diagram The following diagram represents the abilities of the PSPHD. Internal Block Diagram of the PSPHD Stereo Audio Stereo Audio Stereo Audio Stereo Audio Stereo Audio 10 x 1 Analog Audio Stereo Audio Switch 7.3 Mixed...

  • Page 18: Specifications

    PROCISE™ Surround Sound Processor Crestron PSPHD Specifications Specifications for the PSPHD are listed in the following table. PSPHD Specifications SPECIFICATION DETAILS Audio – General Features 27 selectable source inputs plus built-in ® ® noise generator, 7.1 Dolby Digital/DTS surround sound decoder, 7.3 multi-channel signal processing and steering, Audyssey ®...
  • Page 19 CGain 0.0 to 1.0, Standard or Wide mode Dolby Pro Logic IIx Music Dimension ±7, Center Width 0 to 7, Standard Settings or Panorama (Continued on following page) PROCISE™ Surround Sound Processor: PSPHD • 13 Operations Guide – DOC. 6837B...
  • Page 20 -80.0 to 0.0 dB plus mute per channel (Mix 1-3), per output group (Main, Stereo Downmix, Mono Downmix) Master Mixer Presets 1 thru 10 (Continued on following page) 14 • PROCISE™ Surround Sound Processor: PSPHD Operations Guide – DOC. 6837B...
  • Page 21 Power 65 Watts @ 100-240 Volts AC, 50/60 Hz Default Net ID Minimum 2-Series Control Version 4.001.1012 or later 2, 3 System Update File (Continued on following page) PROCISE™ Surround Sound Processor: PSPHD • 15 Operations Guide – DOC. 6837B...
  • Page 22 PROCISE™ High-Definition Surround Sound Amplifier 1. Requires adapter. 2. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following these footnotes. 3. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product Catalog for a complete list of 2-Series control systems.

  • Page 23: Physical Description

    PROCISE™ Surround Sound Processor Physical Description This section provides information on the connections, controls and indicators available on your PSPHD. PSPHD Physical View (front) PSPHD Physical View (rear) PROCISE™ Surround Sound Processor: PSPHD • 17 Operations Guide – DOC. 6837B...
  • Page 24 Crestron PSPHD PSPHD Overall Dimensions 17.28 in (439 mm) 17.08 in (434 mm) 13.89 in (353 mm) 14.75 in (375 mm) 5.20 in (133 mm) 5.74 in (146 mm) 18 • PROCISE™ Surround Sound Processor: PSPHD Operations Guide – DOC. 6837B...
  • Page 25 (and PROAMP if connected) into “Standby” mode (all outputs turned off) DISPLAY (LEFT) The left side of the PSPHD contains a Vacuum Fluorescent Display (VFD) that shows information such as the selected source and decoding method. It is also used to display and configure the PSPHD’s...
  • Page 26 NOTE: To prevent damage to the PSPHD’s finish, use a flat-edge tool made of plastic or covered in tape when removing the front panel The right side of the PSPHD contains a DISPLAY (RIGHT) Vacuum Fluorescent Display (VFD) that can show the volume level, the VU meter, the spectrum analyzer, and the level settings.
  • Page 27 Passes any HDMI audio signal that is supported by the HDMI sink device, otherwise outputs a stereo downmix of the current source (Continued on following page) PROCISE™ Surround Sound Processor: PSPHD • 21 Operations Guide – DOC. 6837B...
  • Page 28 MIXER INPUT 1-3 (3) 3-pin 3.5mm detachable terminal blocks; Balanced/unbalanced line-level inputs Input Impedance: 22k ohms balanced, 11k ohms unbalanced Maximum Input Level: 4 V balanced/unbalanced (Continued on following page) 22 • PROCISE™ Surround Sound Processor: PSPHD Operations Guide – DOC. 6837B...
  • Page 29 (1) IEC Male C14 male chassis plug; Mates with removable power cord (included) GROUND (1) 6-32 screw, chassis ground lug Interface connectors for the NET and MIXER INPUT ports are provided with the unit. PROCISE™ Surround Sound Processor: PSPHD • 23 Operations Guide – DOC. 6837B...

  • Page 30: Setup

    Crestron website (www.crestron.com/manuals). Identity Code The Net ID of the PSPHD has been factory set to 9C. The Net IDs of multiple Net ID PSPHD devices in the same system must be unique. Net IDs are changed from the Installer menu or from a personal computer (PC) via Crestron Toolbox™.

  • Page 31: Installation

    NOTE: The PSPHD is shipped with “feet” installed so it can be stacked with other equipment. If the PSPHD is to be installed in a rack, remove the feet using a #2 Phillips screwdriver. If rack mounting is not required, leave the feet attached to the PSPHD.

  • Page 32: Hardware Hookup

    4. Repeat procedure (steps 1 through 3) to attach the remaining ear to the opposite side. Four “feet” are integrated into the PSPHD so that if the unit is not rack mounted, the Stacking feet can provide stability when the unit is placed on a flat surface or stacked.
  • Page 33 NOTE: A USB port is concealed behind the label cover on the front panel. The USB port is used to connect with a PC and provides a console connection to the PSPHD. A microphone jack is also concealed behind the front panel’s label cover. This jack is used to connect the microphone that is included with the available Crestron Professional Surround Sound Tuning Kit.
  • Page 34 PROCISE™ Surround Sound Processor Crestron PSPHD Refer to the following diagram to properly connect the PSPHD to a PROCISE PROCISE Amplifier amplifier. Connections Connect PSPHD to PROCISE Amplifier NOTE: For optimum performance when connecting to a PROCISE amplifier, Crestron recommends the optional CBL-PRO-XLR-2 (two-foot cable length) or CBL-PRO-XLR-6 (six-foot cable length) cable kit to connect to the PSPHD or other pre-amplifier.
  • Page 35 BALANCED AUDIO INPUT UNBALANCED AUDIO INPUT + In Signal return, jumper to GND Shield/Ground Ground Typical Balanced/Unbalanced Outputs Balanced Unbalanced Input Input Shield Source 1 Source 1 Jumper Shield PROCISE™ Surround Sound Processor: PSPHD • 29 Operations Guide – DOC. 6837B...

  • Page 36: Configuration

    PROCISE™ Surround Sound Processor Crestron PSPHD Configuration After making all hardware connections to the PSPHD, the PSPHD must be configured for operation. Basic configuration is performed with the Installer menu. Advanced audio configuration options such as delay, levels, and equalization are performed with Crestron Toolbox’...

  • Page 37: Audio Setup

    AUDIO SETUP Left, Right SOURCE MODE SETUP INFO 3. Turn the selection knob to display the desired speaker arrangement and press the selection knob to enable the setting. PROCISE™ Surround Sound Processor: PSPHD • 31 Operations Guide – DOC. 6837B...
  • Page 38 Left, Right, Surround Left, Surround Right, Single Back (L,R,SL,SR,SB): Audio separated into 5 channel surround sound. For use in a 6.x surround setup. LEFT SCREEN RIGHT CENTER SUBS SURRND SURRND SEATING LEFT RIGHT SURRND BACK 32 • PROCISE™ Surround Sound Processor: PSPHD Operations Guide – DOC. 6837B...

  • Page 39: Center Speaker

    BACK BACK LEFT RIGHT The PSPHD can be configured to use a center channel speaker. To configure the Center Channel Speaker PSPHD to use a center channel speaker: 1. Open the Audio Setup section as described on page 31. 2. Turn the selection knob until Center Speaker is displayed and press the selection knob to open the Center Channel Speaker control.

  • Page 40: Speaker Impedance

    • Triple Mono: The system uses three mono subwoofers. The speaker impedance setting can be selected from the PSPHD’s front panel. This Speaker Impedance setting is only used to calibrate the VU meters. To select the impedance value: 1.

  • Page 41: Network Setup

    2. Press the selection knob to return to the Installer menu. Network Setup Use the Network Setup section of the Installer menu to define the PSPHD’s network configuration. IP address, Subnet Mask, Default Router, DHCP mode, WINS server, hostname, domain, and MAC address can be adjusted or displayed from the Network Setup menu.
  • Page 42 Pair Crestron Amplifier NOTE: Pairing is for use with Crestron PROAMP amplifiers only. The PSPHD can be paired with a Crestron PROAMP amplifier for control and monitoring of the amplifier. Pairing can be accomplished when the PROAMP amplifier and the PSPHD are connected using a “Network” or “Direct” connection type: •...
  • Page 43 9. When the PSPHD is successfully paired with the PROAMP amplifier, a message is displayed indicating the successful pairing. 10. On the PSPHD, press the selection knob to exit. The display will return to the Network Setup section. 11. Reboot the PSPHD as follows: Press the HOME button to return to the Installer menu.
  • Page 44 3. When prompted, turn the selection knob to highlight the “Clear” option, and then press the selection knob. 4. When prompted by the PSPHD display as to whether you are sure that you want to clear the pairing information, turn the selection knob to “Yes”, and then press the selection knob.

  • Page 45: Subnet Mask

    5. Repeat steps 3 and 4 until the desired IP address is displayed. The IP address will be entered after the last octet has been set. For information on configuring the PSPHD to use a DHCP server to obtain an IP address, refer to “DHCP” on page 40.
  • Page 46 5. Repeat steps 3 and 4 until the desired IP address is displayed. The IP address will be entered after the last octet has been set. The PSPHD’s IP address can be obtained from a DHCP server or manually set using DHCP the front panel controls.
  • Page 47 3. Turn the selection knob to highlight the desired setting and press the selection knob to enable the setting and return to the Network Setup section. The PSPHD can be recognized by its hostname in a networked environment. To Hostname view and set the hostname: 1.

  • Page 48: Control Setup

    2. Press the selection knob to return to the Installer menu. Control Setup Use the Control Setup section of the Installer menu to lock/unlock the front panel controls, and configure the PSPHD for communication with a Crestron control system. To open the Control Setup section of the Installer menu: Open Control Setup 1.

  • Page 49: Front Panel Lock

    SOURCE MODE SETUP INFO The PSPHD’s front panel can be locked to prevent access to the PSPHD’s controls. Front Panel Lock/Unlock To lock and/or unlock the front panel: 1. Open the Control Setup section as described on page 42. 2. Turn the selection knob until the PSPHD’s front panel status is displayed.
  • Page 50 PSPHD’s front panel. To assign an IP ID: 1. Open the Control Setup section as described on page 42. 2. Turn the selection knob until the PSPHD’s IP ID is displayed. Press the selection knob to open the IP ID control.
  • Page 51 < and  > . To delete a character, press the soft button marked Del. To insert a space, press the soft button labeled Ins. NOTE: The maximum length for the hostname is 64 characters. PROCISE™ Surround Sound Processor: PSPHD • 45 Operations Guide – DOC. 6837B...

  • Page 52: About

    1. Turn the selection knob until Back is displayed. 2. Press the selection knob to return to the Installer menu. About Use the About section of the Installer menu to view information about PSPHD’s operating firmware. To open the About section of the Installer menu: 1.

  • Page 53: Programming Software

    Crestron has developed an assortment of Windows -based software tools to develop a controlled / system. You can create a program to control the PSPHD using the Crestron programming tools SystemBuilder™ or SIMPL Windows. For the minimum recommended software versions, visit the Version Tracker page of the Crestron website (www.crestron.com/versiontracker).
  • Page 54 Ethernet interface. If Cresnet operation is desired, the IP table for the PSPHD must be empty. PSPHD Device, Slots 8 and 9 3. Additional PSPHD devices are assigned different Net ID or IP ID numbers as they are added. 48 • PROCISE™ Surround Sound Processor: PSPHD...

  • Page 55: Example Program

    The symbol can be viewed by double clicking on the icon or dragging it into Detail View. Each signal in the symbol is described in the SIMPL Windows help file (F1). Example Program An example program for the PSPHD is available from the Crestron website (www.crestron.com/exampleprograms). PROCISE™ Surround Sound Processor: PSPHD • 49...

  • Page 56: Uploading And Upgrading

    PSPHD Crestron Toolbox The USB port on the hidden on the front of the PSPHD connects to the USB port on the PC via the included Type A to Type B USB cable: 1. Use the Address Book in Crestron Toolbox to create an entry using the expected communication protocol (USB).

  • Page 57: Programs And Firmware

    The PSPHD connects to PC via Ethernet: 1. Establish indirect or USB communication between PSPHD and PC. 2. Enter the IP address, IP mask and default router of the PSPHD via Crestron Toolbox (Functions | Ethernet Addressing); otherwise enable DHCP.

  • Page 58: Program Checks

    Be sure to use Crestron Toolbox to create the PSPHD IP table. 1. Select Functions | IP Table Setup. 2. Add, modify or delete entries in the IP table. The PSPHD can have only one IP table entry. 3. A defined IP table can be saved to a file or sent to the device.

  • Page 59: Operation

    NOTE: Until Audyssey calibration has been performed, the PSPHD front panel will show a message every few seconds indicating that the system should be calibrated. Standby To place the PSPHD in the Standby mode press STANDBY. The display and outputs will be turned off and the STANDBY LED will light. Home Press HOME to return to the home display.

  • Page 60: Surround Sound Decoding Mode Selection

    , and ® Audyssey MultEQ to an incoming signal. The PSPHD can also be set to adjust the bass and treble levels of the incoming audio signal. NOTE: Until Audyssey calibration has been performed, the PSPHD front panel will show a message every few seconds indicating that the system should be calibrated.
  • Page 61 1. Press the SETUP button to display the first Setup option. 2. Turn the selection knob to display Audyssey Dynamic EQ. Audyssey Dynamic EQ Setting SETUP AUDYSSEY Dynamic EQ is Off SOURCE MODE SETUP INFO PROCISE™ Surround Sound Processor: PSPHD • 55 Operations Guide – DOC. 6837B...
  • Page 62 NOTE: The Audyssey MultEQ function cannot be enabled unless a valid calibration has been performed with PROCISE Tools. NOTE: Until Audyssey calibration has been performed, the PSPHD front panel will show a message every few seconds indicating that the system should be calibrated.
  • Page 63 1. Press the SETUP button to display the first Setup option. 2. Turn the selection knob to display TrueHD Auto Compression. Dolby TrueHD Auto Compression Setting SETUP TrueHD Auto Compression is Off SOURCE MODE SETUP INFO PROCISE™ Surround Sound Processor: PSPHD • 57 Operations Guide – DOC. 6837B...
  • Page 64 5. Press the selection knob to confirm the selection. 6. Press HOME to return to the home display. The bass level can be adjusted with the PSPHD front panel. To adjust the bass level: Bass Level 1. Press the SETUP button to display the first Setup option.

  • Page 65: Information

    Crestron PSPHD PROCISE™ Surround Sound Processor 6. Press HOME to return to the home display. The treble level can be adjusted with the PSPHD front panel. To adjust the treble Treble Level level: 1. Press the SETUP button to display the first Setup option.

  • Page 66: Spectrum Analyzer

    2. To view the VU meters for other channels, turn the selection knob. 3. Press HOME to return to the home display. Spectrum Analyzer The PSPHD can display a spectrum analyzer for each channel. To display the spectrum analyzer: 1. Press SPECTRUM. Spectrum Analyzers for the left and right channels will be displayed.

  • Page 67: Problem Solving

    Cresnet power usage of the entire chain. If the unit is home-run from a Crestron system power supply network port, the Cresnet power usage of that unit is the Cresnet power usage of the entire run. The wire gauge and the Cresnet power usage of the run should be used in the following equation to calculate the cable length value on the equation’s left side.

  • Page 68: Reference Documents

    Make sure the cable length value is less than the value calculated on the right side of the equation. For example, a Cresnet run using 18 AWG Crestron Certified Wire and drawing 20 watts should not have a length of run more than 333 feet (101 meters). If Cresnet HP is used for the same run, its length could extend to 1250 feet (381 meters).

  • Page 69: Future Updates

    Future Updates As Crestron improves functions, adds new features and extends the capabilities of the PSPHD, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision.

  • Page 70: Appendix: Audyssey Laboratories, Inc

    Audyssey Dynamic EQ is integrated into Dynamic Volume so that as the playback volume is adjusted automatically, the perceived bass response, tonal balance, surround impression and dialog clarity remain the same. 64 • PROCISE™ Surround Sound Processor: PSPHD Operations Guide – DOC. 6837B...

  • Page 71: Return And Warranty Policies

    Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended or if it has been subjected to misuse, accidental damage, modification or improper installation procedures.

  • Page 72: Trademark Information

    HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Windows Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP/Vista/7 and WindowsNT/2000 are trademarks of Microsoft Corporation. 66 • PROCISE™ Surround Sound Processor: PSPHD Operations Guide – DOC. 6837B...
  • Page 73 Crestron PSPHD PROCISE™ Surround Sound Processor This page is intentionally left blank. PROCISE™ Surround Sound Processor: PSPHD • 67 Operations Guide – DOC. 6837B...
  • Page 74 Crestron Electronics, Inc. Operations Guide – DOC. 6837B 15 Volvo Drive Rockleigh, NJ 07647 (2024778) Tel: 888.CRESTRON 07.10 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

This manual is also suitable for:

Procise psphd

Table of Contents