Adf Chute Assy - Brother MFC-8460N Service Manual

5.1.16 ADF Chute ASSY

(1) Disconnect the 7 connectors (for the model supporting the DX tray only) or 3 connectors
(for the model supporting no DX tray only) from the ADF relay PCB.
(2) Disconnect the connector of the ADF motor harness from the ADF motor.
(3) Remove the cup S M3x8 Taptite screw and ADF FG harness.
ADF motor
Taptite, cup S M3x8
ADF FG harness
<Back side>
Switch back sensor
(for the models with the DX only)
Document front sensor 2
(for the models with the DX only)
ADF relay PCB
(4) Turn the Document cover upside down and remove the cup B M3x10 Taptite screw.
2
ADF relay PCB
S/B solenoid ASSY
(for the models with the DX only)
ADF relay harness
Taptite, cup B M3x10
ADF motor harness
1
Document rear sensor
Document front sensor 1
PF solenoid ASSY
(for the models with the DX only)
Fig. 5-27
Document cover LGL sub ASSY
Fig. 5-28
5-36 Confidential