Chapter 6: Checklists Regarding Installation; Checklist Prior To Completion Of Tecdis Installation - Furuno TECDIS Installation Manual

TECDIS Installation Manual

Chapter 6: Checklists regarding installation

6.1 Checklist prior to completion of TECDIS installation

Item: Task to be performed:
Verify that all selected ports are receiving/transmitting
data, and that ports have been given names on both
1
main and back-up TECDIS. Names shall be according
to the data they are receiving/transmitting.
Verify that sensor data is correctly distributed between
2
main and back-up TECDIS (NMEA server program).
Verify that one single action do not result in loss of
3
position on both main and back-up TECDIS.
Verify that main and back-up TECDIS and respective
4
equipment are connected to a proper UPS.
Verify that boat size are correct compared to chart on
5
both main and back-up TECDIS.
Perform monitor color calibration on main and back-up
6
TECDIS.
Verify that alarm function on both main and back-up
7
TECDIS is working properly.
Check that TECDIS transmits alarm to external
8
systems.
If installed, verify generation of conning picture and
correct display of sensor data on conning monitor
9
(check against engine telegraph, speed repeaters, gyro
repeaters etc)
10 Verify audible signal from alarm speaker on TECDIS
Verify sensor data (correct size of vessel etc) is filled in
11
on main and back-up TECDIS.
Verify that back-up of default setup values have been
12 performed (save setup default values) on main and
back-up TECDIS.
Verify that installed charts have been correctly installed
13 on both main and backup TECDIS (if installed), and
that charts license matches.
Unplug TECDIS USB-key, restart TECDIS to verify it
starts up in normal mode (chart program starts
14
automatically) and boat symbol and sensor data are
displayed.
If connected to internet, verify that a switch is available
15 to disconnect TECDIS from internet when the
connection is not in use.
Fill in hardware/software fact sheet and file it in ships
16 documents, in technician personal files and send a copy
to Furuno Norway or Telko AS.
OK: Comments
Page 64