Enter Vessel Information - Furuno TECDIS Installation Manual

TECDIS Installation Manual
and cannot be removed unless you have a CD for the database available.
The option 'Remove Licenses' will also be displayed in some instances. Selecting this option and
pressing 'Start' will allow you to remove all chart licenses for the specified database. Make sure
you have new valid chart licenses available before starting this option!
If a CD is not available for the chart database
(As would be the case for databases containing
imported S57 data), these databases can be
selected for modification by choosing a drive
other than the CD-ROM drive from the drive
drop down menu. (For example D:\). When
Setup is unable to find a chart database on the
selected drive, you get the option to manually
select an installed database by pressing the
button "Select an Installed DB".
You will get two options for the database you
select from the list of installed databases:
"Remove" and "Set as Default". We
recommend that the "World" database should
be set as default, if installed.
Important: Some chart databases are protected

3.5.2 Enter vessel information:

In this area, information about the vessel and owner should be
entered. This information is needed for chart licensing and
warranty purposes.
Page 45