Additional Units - Furuno TECDIS Installation Manual

TECDIS Installation Manual
Outline dimensions for Trackball:
202 mm

1.5 Additional units

When mounting additional units such as, loudspeaker, analogue alarm units, MOXA interface
and other peripheral equipment, general considerations should be taken to ensure proper
functions of respective equipment.
When selecting a mounting location, keep in mind the following points:
1. Select a location where vibrations are down to a minimum, try to avoid vibrations by
adding strength to console where the processor is about to be installed.
2. Locate the unit away from heat sources because of heat that can build up inside the
cabinet.
3. Locate the equipment away from places subject to water splash and rain.
4. Leave sufficient space on the sides and rear of the unit to facilitate maintenance and
interconnection cabling.
5. Mount the loudspeaker such that audible sound level is not seriously degraded.
Do not protrude the housing with screws to fasten the units. Straps should be used to fasten the
units at its location, without protruding the housing. Straps are not supplied and must be arranged
locally.
101 mm
Page 23