Getting On And Off The Vehicle - APRILIA RSV 1000 R Factory Use And Maintenance Book

Hide thumbs Also See for RSV 1000 R Factory:
Table of Contents

Advertisement

INSTRUCTIONS FOR USE
`
GETTING ON AND OFF THE
VEHICLE
The instructions below must be followed
with the maximum care in order to avoid
injury to persons and damage to property
and to the vehicle, caused by the rider or
passenger falling from the vehicle and/or
the vehicle falling or overturning.
WARNING
Risk of falling and overturning.
Proceed with care.
When getting on and off the vehicle, make
sure nothing can impair your movements.
Also, your hands should be free (replace
any objects, such as your helmet, gloves or
dangling glasses before mounting or
dismounting).
Always mount and dismount from the left
side with the vehicle on the side stand.
CAUTION
However, do not apply you full weight
or that of the passenger to the side
stand.
The stand has been designed to support
the weight of the vehicle and a minimum
load, without the rider and the passenger.
The purpose of placing the vehicle on the
side stand before mounting is to keep the
vehicle from falling or overturning. This
does not mean that the side stand should
be used to support the weight of rider and
passenger.
While getting on and off, the weight of the
vehicle may make you lose balance, and
the vehicle may fall or overturn.
NOTE
The rider must always mount
before the passenger and dismount after
the passenger. It is the rider's responsibility
to keep the vehicle balanced while the
passenger gets on and off.
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents