Tektronix Phaser 440 Service Manual page 6

2 Installing the Printer and Drivers
Pre-install questions for customers 2-2
Unpacking 2-5
Inventory for Phaser 440 printer 2-5
Setting up the printer 2-8
Cabling the printer 2-9
Connecting the printer to a Macintosh 2-9
LocalTalk connection to a Macintosh 2-9
Ethernet connection to a Macintosh 2-9
Connecting the printer to a PC 2-10
Direct connection to a PC 2-10
Networked connection to a PC using the printer's Ethernet port 2-10
Connecting the printer to a workstation 2-10
Direct connection to a workstation 2-10
Networked connection to a workstation 2-10
Installing a SCSI hard disk drive on a Phaser 440 2-11
Turning on the printer 2-12
The startup page 2-12
The configuration page 2-13
Driver and communication setup 2-19
Installing the Macintosh driver 2-19
Installing the Tektronix driver for Windows 3.1 2-20
If you have other Tektronix printer drivers already installed 2-20
Configuring the Tektronix Windows printer driver 2-21
Updating the standard Microsoft Windows PostScript driver 2-23
Installing the printer driver for OS/2 Version 2 2-23
Configuring the printer's serial port for a PC 2-26
Using printcap to configure a Unix workstation for the printer's serial port 2-28
Configuring a Novell NetWare server for the printer 2-29
Configuring TCP/IP 2-30
vi Phaser 440 Color Printer