Using The Error Handler Utility - Tektronix Phaser 440 Service Manual

Using the Error Handler utility

If a PC has trouble printing directly to the printer, download one of the Tek Error
Handler utility files to the printer.
1. Locate the TEKEHAND.PS file in the PHSR440 directory on the Printer
Utility diskette.
2. Copy the file TEKEHAND.PS to the PC's hard disk or use the file from
the diskette.
3. Use the DOS COPY command to send the file to the printer. For
example:
COPY tekehand.ps LPT1:.
If necessary, substitute the appropriate port for LPT1:
This loads the error handling utility into the printer's memory where it remains
until the printer is turned off. Send a file to the printer as explained in the
previous procedure. If an error occurs, the printer will print a page listing the
error.
Verifying the Printer and Host Connections
Service Manual
3
3-7