Table of Contents
Advertisement
7.
When the program finishes removing the old files, choose the Exit
button, and eject the diskette.
8.
If you have the TekColor PS Previewer still installed, refer to the topic
"Removing the TekColor PS Previewer software" in the Phaser 440
Drivers and Utilities Printing Reference to delete the files.
9.
When you are finished removing the old driver files, restart Windows.
10.
Go on to the topic "Installing the Tektronix driver" in this chapter, to
install all of your Tektronix printers with the latest driver software.
Configuring the Tektronix Windows printer driver
1.
The Printers dialog box should still be displayed; if not, double-click
the Printers icon in the Control Panel.
2.
Choose your printer from the list of installed printers.
3.
Choose the Set As Default Printer button if you want to select your
printer as the default.
4.
Choose the Connect button; the Connect dialog box appears.
5.
Select the port the printer is connected to. Your printer is connected to
your computer through one of the computer's communications ports.
You need to tell the driver which port your printer uses so that the
driver can print your documents.
The two main types of communications ports are parallel ports and
serial ports; your computer may have one or more of each. Generally,
your printer is connected through LPT1: if it is connected to a parallel
port, or through COM1: if it is connected to a serial port. If you have
multiple ports, your printer may be connected to another, such as
COM2:.
Note
The printer's configuration page contains the information you need to
set up the printer's port.
For a parallel port setup in Windows: Select your parallel (LPT) port
in the list.
For a serial port setup in Windows: Select your serial (COM) port in
the list. Choose the Settings button to see the Settings dialog box. Fill
in each item according to your configuration, then choose the OK
button. Refer to your Windows documentation for details, or ask your
network administrator for help.
For a network port setup in Windows: Select your network (LPT or
COM) port in the list. Choose the Network button to see the
Printers-Network Connections dialog box. Fill in each item according
to your configuration, then choose the OK button. Refer to your
Windows documentation for details, or ask your network administrator
for help.
Installing the Printer and Drivers
Service Manual
2
2-21
Advertisement
Table of Contents
Troubleshooting
