Tektronix Phaser 440 Service Manual page 47

Table 2-1 Configuration page settings (cont'd.)
Parameter Description
Serial port data Bits used to encode a data byte
bits
Serial port stop Number of stop bits
bits
EtherTalk Port Indicates the type of interpreter in use
interpreter at the port
EtherTalk Indicates the type of printer installed at
printer type the port
EtherTalk zone Name assigned by network
administrator for the zone the printer is
assigned to
EtherTalk The EtherTalk protocol address
network assigned at boot time for routing
EtherTalk node Indicates the EtherTalk address of a
printer on a network
NetWare port Indicates the type of interpreters in use
interpreter at the port (Phaser 440 only)
Strip control Also known as filtering; "Yes" means
characters Adobe intelligent selection routines are
used for protocol detection
Print server Name of printer server
name
Configuration Name of the configuring file server
file server
Login Password Indicates whether or not a network
password has been set
Queue Scan Interval between successive queue
interval scans by the printer
Network Printer's network number on the
Address Ethernet network. It is automatically
set when the printer is turned on
Ethernet frame How IPX packets are transmitted over
type the network
TCP/IP port Indicates the type of interpreter in use
interpreter at the port
RARP/BOOTP Used for setting the printer's IP
(Reverse address from a boot server
Address
Resolution
Protocol/Boot
Parameter
Protocol)
Installing the Printer and Drivers
Saved Default
in
NVRAM
yes 8
yes 1
yes PostScript Level 2 Disabled, <interpreter>
LaserWriter
yes *
yes 0
yes 0
yes Auto Select
yes Yes
yes TEK01B009,
hardware-
dependent
yes null string
yes Not set
yes 15 seconds
yes null string
yes Adaptive
yes
yes False
Limits or alternate choices
7
2
Any string of 32 character or
less
Any string of 32 characters or
less
Integer 1 through 65535
Integer 1 through 65535
Disabled, <interpreter>
Yes, No
user-defined
user-defined
Set
An integer 1 through 3600 in
seconds
An 8 digit hex number
00000001 through
FFFFFFFE
802.3-X, DIX, 802.3-2,
802.3-2-SNAP
Not authorized, Disabled
True
Service Manual
2
2-15