Workstation Printing Problems; Table 6-9 Workstation Printing Problems - Tektronix Phaser 440 Service Manual

Workstation printing problems

Table 6-9 Workstation printing problems

Image never prints.
Printer READY light
flashes as if receiving
data, but nothing comes
out of the printer or the
printer goes back to
"Ready" mode without
printing an image.
For serial or parallel printing. Ensure that the print file ends
with a "CTRL-D" character. CTRL-D indicates the end-of-file
which the printer responds to by closing host-to-printer
communications and then processing and printing the file.
Use a text editor to open and examine the file. There is a
utility file that you can use to tag or remove a CTRL-D to the
end of a print file. TCP/IP and Novell protocols do not accept
CTRL-D with the print files. Refer to the network user manual.
Troubleshooting
Service Manual 6-29
6