Tektronix Phaser 440 Service Manual page 35

For installations using the printer's built-in Ethernet interface you
should inform the network administrator of the printer's
preconfigured Ethernet address. It is printed on the startup page.
Does the customer have the appropriate power outlet available? The
printer's AC power input is set for these voltages:
115 VAC (87 to 128 VAC)
220 VAC (174 to 264 VAC)
If necessary, refer to the later topic "Selecting the AC input voltage."
Did the customer order the correct power cord?
_______ U.S. Standard (161-0230-01)
_______ European Option A1 (161-0104-06)
_______ United Kingdom Option A2 (161-0066-10)
_______ Australian Option A3 (161-0104-05)
_______ Swiss Option A5 (161-0154-00)
Customers must provide the particular interface cable or network
adapter they need to use with the printer. Customers can purchase the
following from the Tektronix Graphics Supplies Order Desk by calling
1-800-835-6100.
10 ft. parallel cable
Serial, 25-pin to 25-pin, 3 m (10 ft.), null modem
Serial, 9-pin to 25-pin, 3 m (10 ft.), null modem
Thick – AAUI to 10Base5
Thin – AAUI to 10Base2
Twisted pair – AAUI to 10BaseT
For AppleTalk installations, customers must provide the appropriate
network adapter to the printer's 9-pin circular LocalTalk connector.
Customers can obtain an adapter from their dealer.
The printer requires the following environmental conditions:
Temperature: 15 to 30
Humidity: 10 to 80% relative humidity, non-condensing
Power: 115 VAC or 220 VAC. The printer requires 5.7 amps of current
at full load in 115 VAC mode; 3.6 A at 220 VAC mode.
Clearances: A space measuring 46 cm wide by 92 cm deep by 76 cm
high (18 ins. wide by 36 ins. deep by 30 ins. high). The space in front
of the printer accounts for enough clearance to install the paper tray.
The extra height is to install the transfer roll.
Weight support: 20 kgs (45 lbs.) minimum; 37 kgs (81.4 lbs.) with
Lower Tray Assembly.
Installing the Printer and Drivers
o o
C (59 to 86 F)
012-1214-00
012-1312-00
012-1313-00
011-0160-00
011-0161-00
011-0162-00
Service Manual 2-3
2