Chapter 2: Printing From Mac Os Computers; Printing From Applications; Selecting The Ga-1040 In The Chooser - Toshiba GA-1040 Operator's Manual

2

2-1 Printing from applications

Chapter 2:
Printing
from Mac OS
Computers
T
O SELECT THE
1. Make sure the GA-1040 is connected to the network and turned on.
2. Choose Chooser from the Apple menu.
3. Click the AdobePS icon to select it.
4. If your network is divided into zones, select the zone in which the GA-1040 is located.
You can print to the GA-1040 just as you would print to any other printer from any
application software. First, select the GA-1040 as the current printer in the Chooser,
and then print the file from within the application.
Another way to print from a Mac OS computer is to download PostScript,
Encapsulated PostScript (EPS), or Portable Document Format (PDF) files using
WebDownloader. Basic instructions are provided at the end of this chapter; for details
on using WebDownloader, see "Downloading files with WebDownloader" on
page 4-4.
Printing from applications
Before you can print to the GA-1040 from applications, you must select the GA-1040
in the Chooser. Then, using the Adobe PostScript printer driver and the correct
PostScript Printer Description file (PPD), you can control many GA-1040 printing
features by specifying job settings from print dialog boxes.

Selecting the GA-1040 in the Chooser

Before you print a job, make sure the GA-1040 is the currently selected printer.
For information about setting up the GA-1040 in the Chooser, see Getting
N :
OTE
Started.
GA-1040
AS THE CURRENT PRINTER
Make sure AppleTalk is set to Active.
N :
OTE