3
3-19 Printing variable data documents with FreeForm
4. Print the variable-elements document to the GA-1040 with the Use Master print
option set to the appropriate FreeForm Master number.
The FreeForm Master number may be one you set yourself when you sent the master-
elements document or it may be one that was assigned by the operator.
FreeForm Master numbers can be overridden from the Command WorkStation, or
Fiery WebSpooler. Check with the operator to make sure that the FreeForm Master
number you specify is the correct one for the FreeForm Master you want to use.
If you want to check the job before it prints, instruct the operator to RIP and Hold the
job so that you can preview it from the Command WorkStation.
The example below shows the FreeForm Master and variable-elements document
combined. The variable data is simply overlaid on the master-elements document.